Blueprints with Entity Input

🎛️

Device Control

medium

3 inputs

Example Automation Blueprint

A description for the blueprint Version: yyyy.mm.dd

entity

device

1.2K3.1K3.2K

🎛️

Device Control

complex

15 inputs

Simple Safe Scheduler

Scheduling a periodic action in Home Assistant might be trickier than what it looks at first glance. Not only the available automation triggers are limited to only time-based schedules (requiring the user to either use template triggers or install additional integrations for more complex scheduling options), but they also do not guarantee that the automation is executed at the provided time. As an example, let's assume automation A is scheduled to run at 12:00. If the Home Assistant server goes down at 11:59 due to a disruptive event (e.g. power outage, planned maintenance, hardware failure etc.) and comes back up at 12:01, the A automation run scheduled for 12:00 would simply be skipped, without any warning to the user. The Simple Safe Scheduler blueprint tries to mitigate scheduling limitations in Home Assistant by providing an easy interface to configure periodic actions, with built-in safety checks to ensure the action actually runs even in case of a disruptive event. The configured automation acts as a simple scheduler, allowing to flexibly program any kind of action based on the following parameters:

Time of the day (dynamically provided as an input_datetime entity);
Day of the week (multiple days can be selected);
Week frequency (allowing to schedule the action to run i.e. every 2 weeks).

In addition, the blueprint implements useful checks to make sure that, in case of a disruptive event (e.g power outage, Home Assistant server outage etc.) happening at the scheduled automation run time, the action is executed as soon as the system restores its state. These checks can be configured to be performed both when Home Assistant boots up and when a custom event is fired (e.g. from another automation or integration). Such safety checks might be particularly important for critical automations, which need to run as close as possible to the scheduled time (e.g. watering plants, configuring an alarm system, etc.). 📕 Full documentation regarding this blueprint is available here. 🚀 This blueprint is part of the Awesome HA Blueprints project. ℹ️ Version 2021.10.22

action

entity

number

1.2K10.7K1.3K

🔘

Button Actions

complex

37 inputs

Controller - IKEA E1524/E1810 TRÅDFRI Wireless 5-Button Remote

Controller automation for executing any kind of action triggered by the provided IKEA E1524/E1810 TRÅDFRI Wireless 5-Button Remote. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

ℹ️ Version 2025.04.19 📝 Changelog 📕 Full documentation regarding this blueprint is available here. 🚀 This blueprint is part of the Awesome HA Blueprints project. Please consider leaving a star on GitHub! 🌟

select

device

entity

1.2K9.2K702

🔘

Button Actions

complex

19 inputs

Controller - IKEA E1743 TRÅDFRI On/Off Switch & Dimmer

Controller automation for executing any kind of action triggered by the provided IKEA E1743 TRÅDFRI On/Off Switch & Dimmer. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K1.7K786

🔘

Button Actions

complex

15 inputs

Controller - IKEA E1744 SYMFONISK Rotary Remote

Controller automation for executing any kind of action triggered by the provided IKEA E1744 SYMFONISK Rotary Remote. Allows to optionally loop a custom action during controller rotation. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K6.0K4.8K

🔘

Button Actions

complex

13 inputs

Controller - IKEA E1766 TRÅDFRI Open/Close Remote

Controller automation for executing any kind of action triggered by the provided IKEA E1766 TRÅDFRI Open/Close Remote. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K10.6K4.0K

🔘

Button Actions

complex

33 inputs

Controller - IKEA E2001/E2002 STYRBAR Remote control

Controller automation for executing any kind of action triggered by the provided IKEA E2001/E2002 STYRBAR Remote control. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K8.9K4.8K

🔘

Button Actions

complex

12 inputs

Controller - IKEA ICTC-G-1 TRÅDFRI wireless dimmer

Controller automation for executing any kind of action triggered by the provided IKEA ICTC-G-1 TRÅDFRI wireless dimmer. Allows to optionally loop a custom action during controller rotation. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K7.1K5.0K

🔘

Button Actions

complex

26 inputs

Controller - OSRAM AC025XX00NJ SMART+ Switch Mini

Controller automation for executing any kind of action triggered by the provided OSRAM AC025XX00NJ SMART+ Switch Mini. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K9.1K3.3K

🔘

Button Actions

complex

33 inputs

Controller - Philips 324131092621 Hue Dimmer switch

Controller automation for executing any kind of action triggered by the provided Philips 324131092621 Hue Dimmer switch. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K9.8K1.9K

🔘

Button Actions

complex

12 inputs

Controller - Philips 8718699693985 Hue Smart Button

Controller automation for executing any kind of action triggered by the provided Philips 8718699693985 Hue Smart Button. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K5.2K992

🔘

Button Actions

complex

33 inputs

Controller - Philips 929002398602 Hue Dimmer switch v2

Controller automation for executing any kind of action triggered by the provided Philips 929002398602 Hue Dimmer switch v2. Allows to optionally loop an action on a button long press. Supports ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K3.4K1.8K

🔘

Button Actions

complex

7 inputs

Controller - SONOFF SNZB-01 Wireless Switch

Controller automation for executing any kind of action triggered by the provided SONOFF SNZB-01 Wireless Switch. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K7.2K3.1K

🔘

Button Actions

complex

18 inputs

Controller - Xiaomi WXCJKG11LM Aqara Opple 2 button remote

Controller automation for executing any kind of action triggered by the provided Xiaomi WXCJKG11LM Aqara Opple 2 button remote. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K7.0K2.2K

🔘

Button Actions

complex

32 inputs

Controller - Xiaomi WXCJKG12LM Aqara Opple 4 button remote

Controller automation for executing any kind of action triggered by the provided Xiaomi WXCJKG12LM Aqara Opple 4 button remote. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K2.1K2.8K

🔘

Button Actions

complex

46 inputs

Controller - Xiaomi WXCJKG13LM Aqara Opple 6 button remote

Controller automation for executing any kind of action triggered by the provided Xiaomi WXCJKG13LM Aqara Opple 6 button remote. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

select

device

entity

1.2K4.1K4.9K

🔘

Button Actions

complex

10 inputs

Controller - Aqara WXKG11LM Wireless Mini Switch / Xiaomi WXKG01LM Mi Wireless Switch

Controller automation for executing any kind of action triggered by the provided Aqara WXKG11LM Wireless Mini Switch / Xiaomi WXKG01LM Mi Wireless Switch. Allows to optionally loop an action on a button long press. Supports deCONZ, ZHA, Zigbee2MQTT. Automations created with this blueprint can be connected with one or more Hooks supported by this controller. Hooks allow to easily create controller-based automations for interacting with media players, lights, covers and more. See the list of Hooks available for this controller for additional details.

More Info

ℹ️ Version 2025.04,16 📝 Changelog 📕 Full documentation regarding this blueprint is available here. 🚀 This blueprint is part of the Awesome HA Blueprints project. Please consider leaving a star on GitHub! 🌟

select

device

entity

1.2K3.6K3.1K

🔘

Button Actions

medium

3 inputs

Hook - Cover

Hook automation which allows to control a cover. Supports opening, closing and tilting the cover. Features may vary depending on the selected cover. Features may vary depending on the selected Controller. An automation created with this blueprint must be linked to a Controller automation. Controllers are blueprints which allow to easily integrate a wide range of controllers (wall switches, remotes, dimmers, etc.) and use them to run a set of actions when interacting with them. They expose an abstract interface used by Hooks to create controller-based automations. A list of controllers supported by this hook is available here.

More Info

ℹ️ Version 2025.03.28 📝 Changelog 📕 Full documentation regarding this blueprint is available here. 🚀 This blueprint is part of the Awesome HA Blueprints project. Please consider leaving a star on GitHub! 🌟

device

select

entity

1.2K4.7K3.0K

🔘

Button Actions

complex

13 inputs

Hook - Light

Hook automation which allows to control a light. Supports brightness and color control both for white temperature and rgb lights. Features may vary depending on the selected Controller. An automation created with this blueprint must be linked to a Controller automation. Controllers are blueprints which allow to easily integrate a wide range of controllers (wall switches, remotes, dimmers, etc.) and use them to run a set of actions when interacting with them. They expose an abstract interface used by Hooks to create controller-based automations. A list of controllers supported by this hook is available here.

More Info

ℹ️ Version 2025.03.29 📝 Changelog 📕 Full documentation regarding this blueprint is available here. 🚀 This blueprint is part of the Awesome HA Blueprints project. Please consider leaving a star on GitHub! 🌟

device

select

entity

1.2K5.7K2.6K

🔘

Button Actions

medium

5 inputs

Hook - Media Player

Hook automation which allows to control a media player. Supports volume setting, play/pause and track selection. Features may vary depending on the selected Controller. An automation created with this blueprint must be linked to a Controller automation. Controllers are blueprints which allow to easily integrate a wide range of controllers (wall switches, remotes, dimmers, etc.) and use them to run a set of actions when interacting with them. They expose an abstract interface used by Hooks to create controller-based automations. A list of controllers supported by this hook is available here.

More Info

device

select

entity

1.2K5.8K2.8K

🎛️

Device Control

medium

5 inputs

Wake-up light alarm with sunrise effect

A wake-up light alarm with a brightness and color temperature sunrise effect using an existing timestamp sensor as source. Requires date_time_iso sensor in configuration!

entity

number

action

5277.3K1.8K

by BeardedTinkerBeardedTinker/Home-Assistant_Config

🎛️

Device Control

simple

3 inputs

Motion-activated Light

Turn on a light when motion is detected.

entity

target

number

5279.6K3.5K

by BeardedTinkerBeardedTinker/Home-Assistant_Config

🔔

Notifications

medium

3 inputs

Zone Notification

Send a notification to a device when a person leaves a specific zone.

entity

device

52710.6K3.6K

by BeardedTinkerBeardedTinker/Home-Assistant_Config

🎛️

Device Control

simple

3 inputs

Motion-activated Light

Turn on a light when motion is detected.

entity

target

number

2733.0K4.7K

by skalavalaskalavala/mysmarthome

🔔

Notifications

medium

3 inputs

Zone Notification

Send a notification to a device when a person leaves a specific zone.

entity

device

2738.4K492

by skalavalaskalavala/mysmarthome

🎛️

Device Control

complex

13 inputs

Octoprint_Discovery_Helper - 2023-03-14

This is Blueprint is provided as a helper for people using the Octoprint Plugin called OctoPrint-HomeAssistant. Within that Plugin there are several suggested Home Assistant Scripts & automations, and this will build them all for you. 📩 There is not an official version control system for Blueprints. However I have found something that comes pretty close. It is not perfect, but for MOST Blueprints, it does just fine. I encourage you to check this script out and use it to easily check if I have updated this blueprint. 🔗 koter84 Blueprint Update Script Community link for this blueprint

text

entity

2009.9K1.7K

by SirGoodenoughSirGoodenough/HA_Blueprints

🔔

Notifications

complex

7 inputs

Person Alert Honitor - 2023-02-22

This BluePrint will monitor a person or persons, and when they 'enter' or 'leave' the zone you pick, it will trigger an action. I use this BluePrint to follow family members around during their day so that the family members at home know where their loved ones are. The monitored areas need to be set up as zones in Home Assistant. SEE: HA ZONES LINK

Open your Home Assistant instance and show your zones.

The person needs something monitoring their location. I use Life360, but the Home Assistant App running on their phone will also work. There are likely other location monitoring methods but I am not aquainted with any of them. SEE:

Open your Home Assistant instance and show your people.

LIFE360 INTEGRATION LINK PERSON INTEGRATION LINK 📩 There is not an official version control system for Blueprints. However I have found something that comes pretty close. It is not perfect, but for MOST Blueprints, it does just fine. I encourage you to check this script out and use it to easily check if I have updated this blueprint. 🔗 koter84 Blueprint Update Script [Community link for this blueprint](NEW LINK)

entity

action

time

2005.4K683

by SirGoodenoughSirGoodenough/HA_Blueprints

🔘

Button Actions

complex

75 inputs

Deprecated - Aqara Magic Cube Zigbee2MQTT - 2022-12-12

THIS BLUEPRINT IS DEPRECATED & IS NO LONGER SUPPORTED. ### FOR REPLACEMENT SEE: https://github.com/SirGoodenough/HA_Blueprints/blob/master/Automations/Zigbee2MQTT%20-%20Xiaomi%20Cube%20Controller%20MQTT%20Triggered.yaml

entity

action

2004.6K4.7K

by SirGoodenoughSirGoodenough/HA_Blueprints

🎛️

Device Control

medium

8 inputs

Broadlink_ON_script_2023-08-07

A script that gets my TV on and Reciever set-up to correct mode. Community link for this blueprint

🗿Notice👮🏿‍♂️:

Copies of the original Blueprint that were converted via the 'Take Control' feature or other means are officially not supported by me.
I may or may not be able to support you when you have a problem after you make changes to my code, as some of the code is no longer mine.
I & my license also require attribution as a link back to the original should you use this code in your own creation.
Here is a link to my license & the original github post expected to be followed & referenced as attribution should you use this code elsewhere.

entity

number

2006.3K137

by SirGoodenoughSirGoodenough/HA_Blueprints

🔔

Notifications

simple

2 inputs

device_reset_script - 2023-12-07

This script was invented to be used with my Device Tracker-Monitor-Notifier Blueprint. I released it as a standalone Script Blueprint because I saw an opportunity to add another tool to my toolbox, and possibly to others toolboxes There are other places in my HA config where I need to reset something and now I can use this thing. It asks for the entity or list of entities that you want to reset and how long you want them to be off for the reset. When a Script using this Blueprint is called, it will use Homeassistant turn off to shut them off, wait the delay, then turn them back on. Simple Simple, but if you are doing it over and over in an automation, this cleans up the code quite a bit.

🗿Notice👮🏿‍♂️:

Copies of the original Blueprint that were converted via the 'Take Control' feature or other means are officially not supported by me.
I may or may not be able to support you when you have a problem after you make changes to my code, as some of the code is no longer mine.
I & my license also require attribution as a link back to the original should you use this code in your own creation.
Here is a link to my license & the original github post expected to be followed & referenced as attribution should you use this code elsewhere.

entity

duration

2002.0K3.6K

by SirGoodenoughSirGoodenough/HA_Blueprints

🎛️

Device Control

simple

3 inputs

Media Player Script Blueprint 2023-12-09

This provides a way to play canned media files with the big long list of YAML entries but keep the main script or automation clean. All that is required there would be a simple line like:
'- service: script.media_player_doorbell_sound' Community link for this blueprint

🗿Notice👮🏿‍♂️:

Copies of the original Blueprint that were converted via the 'Take Control' feature or other means are officially not supported by me.
I may or may not be able to support you when you have a problem after you make changes to my code, as some of the code is no longer mine.
I & my license also require attribution as a link back to the original should you use this code in your own creation.
Here is a link to my license & the original github post expected to be followed & referenced as attribution should you use this code elsewhere.

entity

text

2006.7K2.7K

by SirGoodenoughSirGoodenough/HA_Blueprints

🔘

Button Actions

complex

11 inputs

Binary Sensor Notification

Send a notification or trigger a custom action depending on the state switch of a binary_sensor

entity

select

number

1351.7K979

by panhanspanhans/HomeAssistant

🔘

Button Actions

complex

7 inputs

🎬 Scene Based Theatre Mode

Features 🎬 activates scenes depending on media player states and content types 🔁 automatic caching and restoring of the states of the entities of the Playing Scene 🌇 transition time for switching scenes Help & FAQ: Scene based theatre mode Version: 2.1 If you like my work and support feel free to support me.

entity

select

number

1355.9K2.9K

by panhanspanhans/HomeAssistant

🔘

Button Actions

complex

27 inputs

Zone Notification Extended

✉️ notification when a person enters / leaves a zone 🎬 custom action when a person enters /leaves a zone 🎛️ modify your notifications in color, channel, group, ect. 📴 enable / disable notifications easily ❌ custom condition for blocking / allowing notifications 🌎 notification button support to open a url, e.g. shopping list

Hints

If you want to test this automation, you need to change the state of an observed person. you can do this, in the developer options. Simply filter for your person entity, click on it and change the state to a zone used by this automation. Version: 3.5.3 Help & FAQ: Zone Notification Extended If you like my work and support feel free to support me.

entity

duration

device

1353.3K4.3K

by panhanspanhans/HomeAssistant

🎛️

Device Control

complex

10 inputs

Intelligent Vacuum Cleaning

This script starts a cleaning process of a vacuum cleaner robot depending on a device and its status. For this, the device must remain in a defined status for a certain time. Furthermore, a time period can be defined in which the process can start and the status must be fulfilled. In addition, an air cleaner can be defined for the cleaning process.

entity

number

boolean

1355.1K2.9K

by panhanspanhans/HomeAssistant

🔘

Button Actions

medium

6 inputs

Scene Toggle

Features

toggle through scenes by order or last activated timestamp
define a transition time
select scenes by area and/or include/exclude specific scenes
timeout for beginning at start if using static order

Help & FAQ: Simple Scene Toggle Version: 3.2 If you like my work and support feel free to support me.

area

entity

number

1356.9K2.0K

by panhanspanhans/HomeAssistant

🔘

Button Actions

complex

38 inputs

Controller - IKEA E1524/E1810 TRÅDFRI Wireless 5-Button Remote

select

device

entity

1245.7K3.2K

by brianhanifinbrianhanifin/Home-Assistant-Config

🔘

Button Actions

complex

7 inputs

Inovelli Notification LED (Switch or Dimmer)

An automation which displays a colored pattern on the LED strip on your in-wall Inovelli Switch, Dimmer, or Fan/Switch combo.

entity

text

select

12410.9K2.3K

by brianhanifinbrianhanifin/Home-Assistant-Config

🔘

Button Actions

complex

8 inputs

Zigbee2MQTT - Mijia Wireless Remote Switch (WXKG01LM) actions

Define actions your Xiaomi Mijia Wireless Round Remote Switch using Zigbee2MQTT. For your button entity, choose the right sensor with your button name and the entity id which ends with "_action", e.g. "sensor.kitchen.button_action"

entity

action

12410.6K1.0K

by brianhanifinbrianhanifin/Home-Assistant-Config

🎛️

Device Control

simple

3 inputs

Motion-activated Light

Turn on a light when motion is detected.

entity

target

number

1241.5K1.3K

by brianhanifinbrianhanifin/Home-Assistant-Config

🔔

Notifications

medium

3 inputs

Zone Notification

Send a notification to a device when a person leaves a specific zone.

entity

device

1242.1K3.8K

by brianhanifinbrianhanifin/Home-Assistant-Config

🔘

Button Actions

complex

25 inputs

Z2M - Aqara Opple switch 3 bands

Aqara Opple switch 3 bands (WXCJKG13LM).

entity

action

1244.3K4.6K

by brianhanifinbrianhanifin/Home-Assistant-Config

🔘

Button Actions

medium

4 inputs

Aqara Wireless Switch (single, double, hold)

Control anything using Aqara Wireless Switch. Customizable actions for each press. This version of the blueprint is for buttons supporting single, double and hold actions.

entity

action

1242.4K1.2K

by brianhanifinbrianhanifin/Home-Assistant-Config

🔘

Button Actions

medium

5 inputs

Inovelli LED notification script

A script that displays a notification on an Inovelli dimmer, switch, or fan combo switch.

entity

select

number

1249.1K509

by brianhanifinbrianhanifin/Home-Assistant-Config

📷

Camera Integration

medium

5 inputs

Voice - Calendar Entries - Local Assist Blueprint

More detailed information can be found here

Request calendar entries fully local

Blueprint setup

Required

Set one ore more calendar entries to be used

Optional

Add triggers or change the existing ones
Change or translate the settings for the phrases which will be taken from the trigger
Change or translate the settings for the response given by Assist

These translations are already available:

Dutch
German

Usage

All sentences need to match the format defined in the trigger sentences. By default the following sentences are configured:

(what's|what is) on the (calendar|agenda) [[for] {phrase}]
(what's|what is) on {phrase}['s|s] (calendar|agenda)

Trigger sentence syntax

All parts between square brackets are optional, the sentence will be recognized with and without those parts. A pipe | means or. All parts betwee round brackets are mandatory, but also here the pipe means or. The {phrase} part refers to the moment you want the calendar entries for. This can be today, tomorrow, day after tomorrow for a day related to the current day. It can also be a weekday, like Monday or Thursday. In that case the next weekday will be used. You can also use night, morning, afternoon or evening.

Examples without phrase (will return the current day)

* What's on the agenda
* What is on the calendar

Examples with a phrase (will return the requested moment)

* What's on tomorrow's calendar
* What is on the calendar for Thursday

entity

832.4K4.4K

by TheFesTheFes/ha-blueprints

📷

Camera Integration

medium

2 inputs

Voice - Calendar entries - Full LLM script

Request the calendar entries by use of an LLM

Blueprint setup

Required

Set one or more calendar entries for which you want to get the eventa

Optional

Adjust the prompts for each field used in the script. The descriptions guide the LLM to provide the correct input

Note:

Give the script a clear description. This will be used by the LLM to understand it should use this script for weather forecasts.
Make sure to expose the script to Assist after the script has been saved

Example for script description:

Fetch calendar events from my calendar. In case the data for the weekend is requested, this means Saturday and Sunday

Usage

You can request for the calendar entries in any way yuou can think of, using any language. Unless set otherwise in the LLM configuration, the response will be in the same language as the command. You can refer to a single day, multiple days (e.g. next weekend) a part of the day (e.g. next morning) or one or more hours (e.g. from 5 to 9). You can even ask for specific events, for example, will there be a doctor's appointment in the next 2 weeks.

Examples

What's on the calendar tomorrow?
Do I have something on the calendar this evening?
Am I busy tonight at 9?
Do I have a doctor's appointment next week?

entity

833.1K1.2K

by TheFesTheFes/ha-blueprints

📷

Camera Integration

simple

3 inputs

Voice - Get ToDo Entries - Local Assist Blueprint

More detailed information can be found here

Request calendar entries fully local

Blueprint setup

Required

Set a todo entity to be used as default entity. This entity can be set by name in the trigger to avoid the need to add "list" after the name. By default the trigger is configered for this to be the shopping list. If you want to use another list you need to change the description in the trigger sentence.

Optional

Add triggers or change the existing ones
Change or translate the settings for the response given by Assist

These translations are already available:

Dutch

Usage

All sentences need to match the format defined in the trigger sentences. By default the following sentence is configured:

(what's|what is) on the (shopping list|list named {list_name}|{list name} list)

Trigger sentence syntax

Examples

* What's on the shopping list
* What is on the list named Blueprints to create
* What is on the Blueprints to create list

entity

834.4K1.2K

by TheFesTheFes/ha-blueprints

📷

Camera Integration

medium

5 inputs

Voice - Weather Forecast - Local Assist Blueprint

More detailed information can be found here

Request the weather forecast fully locally

Blueprint setup

Required

Set a weather entity to use for the forecasts

Optional

Add triggers or change the existing ones
Change or translate the settings for the phrases which will be taken from the trigger
Change or translate the settings for the response given by Assist

These translations are already available:

Dutch
German: There are multiple variants available, just mix and match whatever fits your needs
Variant 1
Variant 2

Usage

All sentences need to match the format defined in the trigger sentences. By default the following sentences are configured:

what('s| is) [this|next] ({phrase}[']s|the [current]|this) weather [forecast]
what('s| is) the weather [forecast] [for] [this|next] ({phrase}|day)
what('ll| will) the weather [forecast] be [like] [[for] [[the] coming|this] ({pharse}|day)]

Trigger sentence syntax

All parts between square brackets are optional, the sentence will be recognized with and without those parts. A pipe | means or. All parts betwee round brackets are mandatory, but also here the pipe means or. The {phrase} part refers to the moment you want the weather forecast for. This can be today, tomorrow, day after tomorrow for a day related to the current day. It can also be a weekday, like Monday or Thursday. In that case the next weekday will be used. You can also use night, morning, afternoon or evening.

Examples without phrase (will return the current day)

* What's the weather
* What will the weather be like

Examples with a phrase (will return the requested moment)

* What's the weather tomorrow
* What is the weather forecast for next Thursday
* What will the weather be like this evening

entity

833.4K1.1K

by TheFesTheFes/ha-blueprints

🎛️

Device Control

simple

3 inputs

Motion-activated Light

Turn on a light when motion is detected.

entity

target

number

812.4K2.5K

by jazzyisjjazzyisj/home-assistant-config

🔔

Notifications

medium

3 inputs

Zone Notification

Send a notification to a device when a person leaves a specific zone.

entity

device

811.3K2.7K

by jazzyisjjazzyisj/home-assistant-config

🔔

Notifications

simple

2 inputs

Announce

A script that announces a message on a media player using text-to-speech.

entity

813.5K3.6K

by jazzyisjjazzyisj/home-assistant-config

🎛️

Device Control

simple

2 inputs

Sync a light with a binary sensor

This automation keeps a light in sync with a binary sensor.

entity

619.4K1.3K

🎛️

Device Control

simple

2 inputs

Toggle a light with a binary sensor

This automation takes a binary_sensor to toggle a light.

entity

616.5K414

🎛️

Device Control

simple

3 inputs

Turn off lights on no motion

This automation turns off the lights after a certain period of motion inactivity.

target

entity

number

614.8K2.1K

🎛️

Device Control

medium

4 inputs

Lightsaver

Turn off the lights in a room when unnecessary. Requires the sun integration.

entity

number

614.1K2.3K

🎛️

Device Control

medium

2 inputs

Set a volume limit for any Media Player entity.

This automation lowers the volume if it exceeds the allowed limit.

entity

number

6110.2K5.0K

🎛️

Device Control

medium

3 inputs

Party Lights!

entity

number

618.6K2.9K

🔘

Button Actions

simple

2 inputs

ZHA - IKEA TRADFRI - 1 Button Remote - OnOff

This automation simulates the use of the IKEA TRADFRI SHORTCUT Button connected through ZHA.

device

entity

618.0K572

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 1 Button Remote - Color Preset

This automation simulates the use of the IKEA TRADFRI SHORTCUT Button connected through ZHA.

device

entity

611.1K2.6K

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 1 Button Remote - Scenes

This automation simulates the use of the IKEA TRADFRI SHORTCUT Button connected through ZHA.

device

entity

6110.3K3.7K

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 2 Button Remote - OnOff and Brightness

This automation simulates the use of the IKEA TRADFRI on/off switch connected through ZHA.

device

entity

number

611.3K244

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 2 Button Remote - OnOff and Temperature

This automation simulates the use of the IKEA TRADFRI on/off switch connected through ZHA.

device

entity

number

6110.1K378

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 5 Button Remote - Color Lights

This automation simulates the use of the IKEA TRADFRI remote control connected through ZHA.

device

entity

number

612.3K4.6K

🔘

Button Actions

medium

4 inputs

ZHA - IKEA TRADFRI - 5 Button Remote - Custom Preset

This automation simulates the use of the IKEA TRADFRI remote control connected through ZHA.

device

entity

number

6110.5K5.0K

🔘

Button Actions

medium

4 inputs

ZHA - IKEA TRADFRI - 5 Button Remote - Preset Colors

This automation simulates the use of the IKEA TRADFRI remote control connected through ZHA.

device

entity

number

611.7K3.8K

🔘

Button Actions

medium

4 inputs

ZHA - IKEA TRADFRI - 5 Button Remote - Preset Color Temperature

This automation simulates the use of the IKEA TRADFRI remote control connected through ZHA.

device

entity

number

613.8K1.2K

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 5 Button Remote - Warm White Lights

This automation simulates the use of the IKEA TRADFRI remote control connected through ZHA.

device

entity

number

613.7K427

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - STYRBAR - Color Lights

This automation simulates the use of the IKEA TRADFRI STYRBAR remote control connected through ZHA.

device

entity

number

6110.5K2.9K

🔘

Button Actions

medium

4 inputs

ZHA - IKEA TRADFRI - STYRBAR - Custom Preset

This automation simulates the use of the IKEA TRADFRI STYRBAR remote control connected through ZHA.

device

entity

number

613.5K3.5K

🔘

Button Actions

medium

4 inputs

ZHA - IKEA TRADFRI - STYRBAR - Preset Colors

This automation simulates the use of the IKEA TRADFRI STYRBAR remote control connected through ZHA.

device

entity

number

611.2K4.8K

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - STYRBAR - Warm White Lights

This automation simulates the use of the IKEA TRADFRI STYRBAR remote control connected through ZHA.

device

entity

number

618.8K2.8K

🔔

Notifications

simple

2 inputs

Announce Message

Announce a message on a speaker

entity

615.3K1.4K

🔘

Button Actions

complex

38 inputs

Controller - IKEA E1524/E1810 TRÅDFRI Wireless 5-Button Remote

select

device

entity

236.4K4.5K

📷

Camera Integration

complex

13 inputs

Frigate Notifications (0.14.0.3h)

Frigate Notifications

A highly customisable Notification template for Frigate Camera Notifications.

Software Version Requirements

Minimum Home Assistant Version: 2024.11
Minimum Frigate Version: 0.14.0
Minimum Frigate Integration Version: 5.7.0
- Note: "Enable the unauthenticated notification event proxy" must be ticked during setup
An MQTT broker connected to Home Assistant and Frigate.
Minimum iOS Version: 15.0

Required Configuration Options:

Frigate Cameras
Mobile Device (Running HA Companion App)

Features:

Easily select the camera entities or mobile device using a drop-down menu.
Configure multiple cameras in one automation.

For the full features list visit the GitHub Repository

Support

Go to https://github.com/SgtBatten/HA_blueprints to report bugs, request new features, or get support with your configuration.

entity

device

231.9K440

📷

Camera Integration

complex

13 inputs

Frigate Notifications (0.14.0.2w)

Frigate Notifications

A highly customisable Notification template for Frigate Camera Notifications.

Software Version Requirements

Minimum Home Assistant Version: 2024.10
Minimum Frigate Version: 0.14.0
Minimum Frigate Integration Version: 5.7.0
- Note: "Enable the unauthenticated notification event proxy" must be ticked during setup
An MQTT broker connected to Home Assistant and Frigate.
Minimum iOS Version: 15.0

Required Configuration Options:

Frigate Cameras
Mobile Device (Running HA Companion App)

Features:

Easily select the camera entities or mobile device using a drop-down menu.
Configure multiple cameras in one automation.

For the full features list visit the GitHub Repository

Support

Go to https://github.com/SgtBatten/HA_blueprints to report bugs, request new features, or get support with your configuration.

entity

device

236.1K914

🔔

Notifications

complex

12 inputs

Update notifications

Send notifications for new updates and install or skip on action

entity

device

boolean

238.0K1.6K

🔘

Button Actions

complex

22 inputs

Z2M - Inovelli 2-in-1 switch + dimmer Scene Controls

For Inovelli Blue Series 2-in-1 switch + dimmer, model VZM31-SN Allows setting a few different actions such as 2,3,4,5 clicking the up/down and config buttons.

entity

action

236.6K3.7K

🔘

Button Actions

complex

9 inputs

Contextual Pico Media Remote

This blueprint creates an automation allowing a Lutron Caseta 5 button Pico remote to contextually control music or an Xbox. It assumes Sonos speakers are being used, and the same speakers are used for both music and the Xbox. In my configuration I have an Xbox attached to a TV that has Sonos speakers attached via an HDMI Arc/eArc channel. When the Xbox is on, the remote's on (top) and off (bottom) buttons map to the Xbox A and B buttons respectively. This is great, particularly in media apps, since A is used to select, play or pause while B is used to stop or go back. When the Xbox is not powered, on (top) is mapped to playing / pausing music and off (bottom) is mapped to going to the next music track. For both Xbox and music playback the raise (up arrow) button increases speaker volume and lower (down arrow) button decreases speaker volume. While favourite / stop (round middle) button is configurable.

device

entity

target

2110.6K4.7K

by TalvishTalvish/home-assistant-blueprints

🔘

Button Actions

complex

13 inputs

Sonos Sleep / Alarm Handler

This blueprint creates an automation that listens for a button press on a Lutron Caseta Pico remote and depending on the time of day does different things. If pressed during the Wake Phase it will disable the current or upcoming alarm on a Sonos speaker disable, and execute an optional action. If pressed during the Sleep Phase, it executes an optional action, annouce when the next alarm is set to run, and ends with some optional sleep music.

entity

device

text

215.7K1.0K

by TalvishTalvish/home-assistant-blueprints

🔘

Button Actions

simple

2 inputs

Automatic Timed Turn Off

This simple blueprint is used to create an automation that will automatically turn off the specified switch after a given time period whenever the specified switch is turned on.

entity

duration

218.4K4.1K

by TalvishTalvish/home-assistant-blueprints

🎛️

Device Control

simple

3 inputs

Motion-activated Light

Turn on a light when motion is detected.

entity

target

number

206.1K738

by todschmidttodschmidt/homeassistant-config

🔔

Notifications

medium

3 inputs

Zone Notification

Send a notification to a device when a person leaves a specific zone.

entity

device

208.3K358

by todschmidttodschmidt/homeassistant-config

🔘

Button Actions

complex

14 inputs

Send actionable notifications for Android

Send actionable notifications to an Android device For each action, you can open an URL, an application on the device or load a lovelace view/dashboard. If you plan to use a lovelace view the format would be /lovelace/test where test is replaced by your defined path in the defined view. If you plan to use a lovelace dashboard the format would be /lovelace-dashboard/view where /lovelace-dashboard/ is replaced by your defined dashboard URL and view is replaced by the defined path within that dashboard. To pick the application to open, prefix app:// to the the package name. If the device does not have the application installed then the Home Assistant application will open to the default page. If you define an action and an URI for a button, URI will take precedence over action.

device

entity

boolean

176.2K1.7K

by apollo1220apollo1220/blueprints

📷

Camera Integration

complex

8 inputs

Camera Detection

No description provided

device

entity

text

176.4K5.0K

by apollo1220apollo1220/blueprints

🔘

Button Actions

complex

11 inputs

Turn on based on motion

Turn on a light, switch, scene, script or group based on motion detection, and low light level. Required entities:

Motion sensor (single sensor or group)
Target entity (light, switch, scene or script)

Optional features:

You can set a cutoff entity of which the value determines whether the illuminance level is low and the automation needs to trigger.
You can define a blocking entity, which blocks the automation from running when this entity's state is on.
You van define a turn-off blocking entity, which blocks the entity from turning off after the set delay.
Time limits can also be defined to limit the time before and after the automation should trigger.
If you want the entity to turn off after a certain amount of seconds, you can use the Wait Time input.
If you want another entity than the target_entity to turn off after the delay, you can define a separate Turn-off entity.
If you do not enable the optional entities the automation will skip these conditions.

entity

number

action

178.6K4.8K

by apollo1220apollo1220/blueprints

🔘

Button Actions

complex

7 inputs

Philips Tap Dial Switch

Control lights with a Philips Hue Tap Switch. Use the four buttons to control up to four light(s) with an on/off toggle. The dial can be used to dim the most recently used light.

device

target

entity

177.7K4.9K

by apollo1220apollo1220/blueprints

🔘

Button Actions

complex

9 inputs

Philips Dimmer Remote

Control lights with a Philips Hue Dimmer Switch. The top "on" button will turn the lights on to the last set brightness (unless the force brightness is toggled on in the blueprint). Dim up/down buttons will change the brightness smoothly and can be pressed and hold until the brightness is satisfactory. The bottom "off" button will turn the lights off. If defined it will optionally control up to 5 different sets of lights using the double through quintuple press options. Whichever light was turned on last will be controlled by the dimmer buttons.

device

target

boolean

174.1K3.4K

by apollo1220apollo1220/blueprints

🎛️

Device Control

medium

4 inputs

Charge phone

Charges phone until a percentage and then turns off until percentage drops below a defined point.

entity

target

number

176.2K2.5K

by apollo1220apollo1220/blueprints

🎛️

Device Control

medium

2 inputs

Pause Playing Media During Calls

Automatically pause the playing media when you get a call! Currently this only works with the Home Assistant Companion app for Android.

entity

target

67.0K4.2K

by ludeeusludeeus/home-assistant-configuration

🚶

Motion Detection

complex

12 inputs

Actionable Alert

Trigger an alert based on the state of a given sensor. An action is executed and repeats as long as the sensor is in the alert state.

entity

number

action

24.4K2.7K

🔘

Button Actions

medium

2 inputs

Always On

Always keep on a switch. If it is turned off, then turn it back on.

entity

duration

25.1K2.1K

🚶

Motion Detection

medium

7 inputs

Appliance has finished

Perform one or more actions when an appliance (like a washing machine or dishwasher) has started and finished as detected by a power sensor.

entity

number

duration

27.3K2.1K

🔘

Button Actions

medium

3 inputs

ZHA - IKEA TRADFRI - 2 Button Remote - On/Off and Brightness

Simulate IKEA TRADFRI 2 button remote connected through ZHA.

device

entity

number

22.8K1.1K

🎛️

Device Control

complex

12 inputs

AWTRIX show entity

Show entity

text

entity

object

03.4K3.3K

🎛️

Device Control

complex

17 inputs

Zigbee2MQTT - ERS-10TZBVK-AA

Zigbee Smart knob

entity

action

06.0K2.0K

🎛️

Device Control

complex

10 inputs

Awtrix current playing song

Shows the title and artist of your current playing song on Awtrix.

device

entity

text

02.2K3.0K

🎛️

Device Control

complex

6 inputs

Wake-up light alarm with sunrise effect

A wake-up light alarm with a brightness and color temperature sunrise effect using an existing timestamp sensor as source. Requires date_time_iso sensor in configuration!

entity

time

number

06.1K1.4K

🎛️

Device Control

complex

8 inputs

AWTRIX Solar Energy Monitor

This blueprint will show the current solar energy received. It uses a icons 54156 (solar-green), 50557 (solar-white-dyn), 50546 (solar-static) that you need to install.

device

entity

number

010.8K2.0K

🎛️

Device Control

medium

2 inputs

AWTRIX playing now

Show the current playing track

entity

device

05.0K4.5K

🎛️

Device Control

simple

3 inputs

Motion-activated Light

Turn on a light when motion is detected.

entity

target

number

02.3K985

🔔

Notifications

medium

3 inputs

Zone Notification

Send a notification to a device when a person leaves a specific zone.

entity

device

03.4K2.9K

🔘

Button Actions

complex

35 inputs

AWTRIX Weather ⛈️ + Forecast + 🌕️ (Service Calls)

This is somewhat of a mega-weather blueprint with moon phase support. However for it work correctly you will need a variety of different things setup. It was initially designed to use in partnership with a personal weather station however it seems to work fine with OpenWeather as well or any other provider that offers an hourly forecast. AWTRIX Weather ⛈️ + Forecast + 🌕️ (Service Calls) screenshot

This blueprint will publish to two separate topics. jeef_weather for the weather report and jeef_weather_sun if its near sunrise/set

⚠️ REQUIREMENTS ⚠️

For this blueprint to work you MUST have a few things pre-setup.

Moon Integration 🌕️

 .------.
( I MOON )    ..
 `------'   .' /
      O    /  ;
        o i  OO
         C    `-.  Make sure you've
         |    <-'      enabled
         (  ,--.   the MOON Sensor
          V  \_)
           \  :
            `._\.

The moon integration is required. You can add it via the moon page or just by clicking here

Moon Rise/Set Sensor 🌕️ ⏲️

      M
     (X)
    // \\   Lets use a GeoLocation to find
   //   \\     out the Moon Rise / Set
  //     \\       TIMES
 //       \\
/           \

As Home Assistant doesn't currently provide moon rise/set times you will need to get this from some api. You can use the ipgeolocation API. To do so you will need to create an account and extract your API_KEY. Additionally you need your LAT and LON. Then you can add a REST sensor to your configuraiton.yaml file like the one here:

resource: https://api.ipgeolocation.io/astronomy?lat=<LAT>&long=<LON>&apiKey=<API_KEY>
name: ip_geo_location
scan_interval: 300
value_template: "OK"
json_attributes:
  - moonrise
  - moonset
  - moon_altitude

Icons

You can call my custom script which will prompt you for an Awtrix device and then upload the required icons: (If you have windows I don't know if this will work)

bash -c "$(curl -fsSL https://raw.githubusercontent.com/jeeftor/HomeAssistant/master/icons/upload_icon.sh)"

This blueprint ~will~ may be updated as new features

https://raw.githubusercontent.com/jeeftor/HomeAssistant/master/blueprints/automation/awtrix_weatherflow.yaml

device

entity

number

07.4K1.2K

🎛️

Device Control

simple

1 inputs

LLM Helper script for fetching weather forecasts

Creates a script which will allow an LLM to fetch weather forecasts

entity

08.2K329